INA KIT.KWVE55-B-200 Bearing



Welcome To RAD bearings
Zhihui Road,Jiangsu China
E:[email protected]
INA KIT.KWVE55-B-200 bearing
Categories:INA bearings distributor Note:INA KIT.KWVE55-B-200 bearing
Please contact Email for any inquiries
EMAIl:[email protected]
bearing name:INA KIT.KWVE55-B-200 bearing
Brand model :KIT.KWVE55-B-200
outer diameter D :Advisory mm
diameter d :Advisory mm
thickness B :Advisory mm
category: RAD BEARING LTD
brand:INA
Remark:INA KIT.KWVE55-B-200  bearing  price 

Carriages - KWVE..-B - medias - Schaeffler

Carriages KWVE..-B. standard carriage, four-row, full complement ball set. Carriages KWVE..-B, standard carriage, four-row, full complement. Compressive load Tensile load Moments about all axes Sealed on all sides Grease lubrication Oil lubrication. H. mm. B. mm. L. mm. KWVE15-B, 24, 47, 61,2. Download CAD drawing Axial angular contact ball bearings ZKLDF200. double direction, for Limiting speed. The limiting speeds increased by a factor of two are valid for bearings of the current generation with the internal suffix -B. Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.



Other bearings
  • KIT.KWVE45-B-200 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M5 = 5,8. M6 = 10. M8 = 24. M10 = 41. M12 = 83. M14 = 140. If there is a possibility of settling, the fixing screws should be secured against rotation. H1, 9,7 mm. H4, 17,2 mm. H5, 9,25 mm. h, 34,2 mm. h1, 16,2 mm. JB, 100 mm. JL, 80 mm. JL6, 35,3 mm
  • KIT.KWVE55-B-220 INADescription:Bearings. In the design of a bearing arrangement for rope sheaves, the relevant information in Catalogue HR 1, Rolling Bearings must always be observed. .. SL045020-D-PP. 2) For snap rings WRE. 3) For retaining ring to DIN 471. Dimension table · Dimensions in mm. Designation1). Mass. Dimensions m d. D. B. C. C1.
  • KIT.KWVE55-B-210 INADescription:Radial insert ball bearings GYE..-KRR-B. spherical outer ring, location by grub screws, R seals on both sides. Radial insert ball bearings GYE..-KRR-B, spherical outer ring,. Radial load Axial load in one direction Axial load in two directions Static angular error and misalignment Sealed on both sides Lifetime lubrication,
  • KIT.KWVE55-B-100 INADescription:INA Linear ball Guide Ways. KWVE; four-row; design with anti-corrosion protection possible; KWVE..-B; four-row; design with anti-corrosion protection possible; KWVE..-B; standard carriage, four-row, full complement ball set; KWVE..-B-L; long carriage, four-row, full complement ball set; KWVE..-B-H; high, narrow carriage,
  • KIT.KWVE45-B-300 INADescription:Carriages KWVE..-B. standard carriage, four-row, full complement ball set. Carriages KWVE..-B, standard carriage, four-row, full complement. Compressive load Tensile load Moments about all axes Sealed on all sides Grease lubrication Oil lubrication. H. mm. B. mm. L. mm. KWVE15-B, 24, 47, 61,2. Download CAD drawing
  • KIT.KWVE45-B-210 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M5 = 5,8. M6 = 10. M8 = 24. M10 = 41. M12 = 83. M14 = 140. If there is a possibility of settling, the fixing screws should be secured against rotation. H1, 9,7 mm. H4, 17,2 mm. H5, 9,25 mm. h, 34,2 mm. h1, 16,2 mm. JB, 100 mm. JL, 80 mm. JL6, 35,3 mm
  • KIT.KWVE35-B-100 INADescription:Carriages KWVE..-B. standard carriage, four-row, full complement ball set. Carriages KWVE..-B, standard carriage, four-row, full complement. Compressive load Tensile load Moments about all axes Sealed on all sides Grease lubrication Oil lubrication. H. mm. B. mm. L. mm. KWVE15-B, 24, 47, 61,2. Download CAD drawing
  • KIT.KWVE30-B-300 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M4 = 5. M5 = 10. M6 = 17. M8 = 41. M10 = 83. M12 = 140. M14 = 220. If there is a possibility of settling, the fixing screws should be secured against rotation. H1, 5,9 mm. H5, 6,25 mm. h, 23,5 mm. h1, 11,5 mm. JB, 40 mm. JL, 40 mm. JL6, 21,1 mm. jL, 80 mm
  • KIT.KWVE25-B-300 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M5 = 5,8. M6 = 10. M8 = 24. M10 = 41. M12 = 83. M14 = 140. If there is a possibility of settling, the fixing screws should be secured against rotation. H1, 5,1 mm. H4, 10,9 mm. H5, 5,25 mm. h, 18,7 mm. h1, 8,7 mm. JB, 57 mm. JL, 45 mm. JL6, 12,85 mm. JLZ, 40
  • KIT.KWVE20-B-220 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M3 = 2,5. M4 = 5. M5 = 10. M6 = 17. M8 = 41. M10 = 83. M12 = 140. M14 = 220. M16 = 340. If there is a possibility of settling, the fixing screws should be secured against rotation
  • KIT.KWVE15-B-210 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M5 = 5,8. M6 = 10. M8 = 24. M10 = 41. M12 = 83. M14 = 140. If there is a possibility of settling, the fixing screws should be secured against rotation. H1, 2,1 mm. H4, 7,7 mm. H5, 4,5 mm. h, 12,9 mm. h1, 6 mm. JB, 60 mm. JL, 29 mm. jB, 22 mm. jL, 50 mm
  • KIT.KWVE35-B-220 INADescription:in the handling equipment and automation technology sectors. Further information on the linear recirculating ball bearing and guideway assemblies: INA Catalogue “Monorail guidance systems” 605 and “MAI 91”, INA-CD-ROM “medias® professional”. Toothed guideway with SB carriage k. 0. M. C. □ carriage KWVE..B SB
  • KIT.KWVE30-B-210 INADescription:Included in KIT: 1.) 1x fixing screws K1 (2 pieces) 2.) 1x end plate, non-contact type 7.) 1x end wiper, contact type, double lip, with carrier plate (8.) 12.) 1x long term lubrication unit
  • KIT.KWVE45-B-330 INADescription:Carriages KWVE..-B-H. high, narrow carriage, four-row; corrosion-resistant design possible. Carriages KWVE..-B-H, high, narrow carriage, four-row;. Compressive load Tensile load Moments about all axes Sealed on all sides Grease lubrication Oil lubrication. H. mm. B. mm. L. mm. KWVE15-B-H, 28, 34, 61,2. Download
  • KIT.KWVE30-B-370 INADescription:For screws to DIN ISO 4762-12.9. Max. tightening torque in Nm: M4 = 5. M5 = 10. M6 = 17. M8 = 41. M10 = 83. M12 = 140. M14 = 220. If there is a possibility of settling, the fixing screws should be secured against rotation. H1, 5,9 mm. H5, 6,25 mm. h, 23,5 mm. h1, 11,5 mm. JB, 40 mm. JL, 40 mm. JL6, 21,1 mm. jL, 80 mm
  • KIT.KWVE35-B-320 INADescription:Carriages KWVE..-B. standard carriage, four-row, full complement ball set. Carriages KWVE..-B, standard carriage, four-row, full complement. Compressive load Tensile load Moments about all axes Sealed on all sides Grease lubrication Oil lubrication. H. mm. B. mm. L. mm. KWVE15-B, 24, 47, 61,2. Download CAD drawing